Maserati Ghibli Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
Hi has anyone changed glow plugs at the V6 Diesel?

Is it difficult? I think Bosch 0250 603 008 are the flow plugs I need...

I had now 2 days with CEL after cold start because it is really cold here... - 7°C

Error P062B00 in the engine...

Thanks alot for your help!
 

·
Registered
Joined
·
523 Posts
Hi Peter, does not look too difficult, On the right hand side you'll have to dismantle the inlet pipework, like when changing the oil filter.
I'd advise you to spray some freeing agent like WD40 on the plugs the nigh before.
Also when screwing them back in, avoid to overtighten them, may be with a bit of ceramic grease (I tend not to use copper slip, it dries up)
I use this for brake pads and pins, wheel nuts and glow plugs.
 
1 - 3 of 3 Posts
Top