Maserati Ghibli Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I had someone change the battery in my 2018 Ghibli S. They accidentally ripped the wires from the pigtail connector going into the IBS sensor. Its a 2 pin connector but I want to have them connected correctly. Any ideas on it? Or any ideas on where I can get a wiring diagram for it? Thanks in advance!
 

·
Registered
Joined
·
101 Posts
May have damaged the pins getting yanked out, so you may want to look at replacing the pins before sticking the wires back in.

Or just stick the wires back in and make sure that you hear a click, and that they do not come back out two easily.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
May have damaged the pins getting yanked out, so you may want to look at replacing the pins before sticking the wires back in.

Or just stick the wires back in and make sure that you hear a click, and that they do not come back out two easily.
Thank you!
 
1 - 5 of 5 Posts
Top